(14) The PACKER Fixture Collets are machinable collet blanks to
accomodate an unlimited variety of workholding applications. The
5C shank can be mounted in any 5C collet spindle for turning odd
shaped parts or for milling in multi-axis machining centers.
With a little "Toolmaker Ingenuity", multiple cavities can be created
to hold and machine multiple parts in a single setup. Mounting in a
one or two axis index fixture, the inhanced accessability of a part can
potentially reduce multiple fixturings and cut cycle and setup times.
The threaded 5C back screw is removable and replacable to extend
the life-cycle of the collet. When the threads are worn or damaged,
the back screw is easily replaced. The fixture collet ...
(23) An excellent alternative to bushings. The BUSHETTE Tool Holders are
designed especially for CNC Lathes and Turning Centers where tools
must be practical and hard working to keep your machines
competitive in today’s tough market. Excellent for presetting backup
tooling and setting up for your next job.
All BUSHETTE's are fully hardened and precision ground.
Available for 5C, R8, 3C, 3AT, 2MT and 3J Collets.
Collet Stops are included with all 5C BUSHETTE's.
A great way to make use of the Collets lying
around the shop.
(37) The most effective and accurate means of internal chucking
for short runs to mass production. Features a solid, one piece
body for maximum rigidity and repeatability. Once seated in
the spindle and machined to size, these collets can hold
concentricity well within .0005". Applicable on any machine or
fixture with a 5C spindle. Machinable to any configuration
within their stock and minimum machinable diameters.
Collets with diameters 4" and larger feature our exclusive
lock ring for greater stability and accuracy while machining
to their specific application.
(13) An effective and economical means for
internal chucking. Easy Machinability and
operation. Available individually or in
complete sets with wrenches.
(6) A simple and accurate way to turn a radius on your manual lathe. Each unit features a rigid cast iron
construction for an accurate chatter-free operation and long life. The gearing is fully enclosed to
prevent the entrance of any chips or foreign matter. Setups are quick and easy. An extension handle
is included to keep your hands away from the hot chips while feeding the tool.
All tools use 1/4" square tool bits except for the No. A1-248-04 which uses a 3/8" square tool bit.
(4) A valuable time saver for your Lathes and
Turning Centers. Every ring you will ever need
for boring out your soft jaws on one convenient
wooden rack.
The Standard Set [A1-220-00] includes the
complete set of 48 rings from 1" to 315/16" in 1/16"
increments on a wooden rack.
The Short Stack [A1-220-10] from the standard
set, includes 16 rings from 1" to 115/16" in 1/16"
increments on a wooden rack.
